The table below sets out our standard technical parameters. If your component sits outside any of these limits, talk to us anyway – we have developed more than 1000 components to date, and many of them started as an exception.
| Manufacturing Process | Investment casting by lost wax method, precision machining, product assembly |
| Job Handling Capacity | 0.050 kg to 45 kg per piece |
| Area of Land | 5200 Sq. Meter |
| Build Up Area | 2885 Sq. Meter |
| Installed Capacity | 80 MT / Month |
| Present Production | 30 MT / Month |
| Annual Capacity | 950 MT / Annum |
| Weight Range | 50 Grams to 45 kg |
| Minimum Wall Thickness | 3.00 mm |
| Dimensional Accuracy | Approx. ±0.005" per inch of dimension |
| Surface Roughness | As cast Ra 3.2 to 6.3 µm, machined Ra 0.5 µm (min) |
| Dimension | As per customer requirement |
| Surface Condition | Shot, electro polishing, zinc or as per customer requirement |
| Supply Condition | Raw, finished, assembled or as per customer's demand |
| Quality Approval | ISO 9001:2015 & ZED Certified |
| Standards Met | ASTM, ASME, AISI, DIN, EN and customer specifications |
One of our stated quality objectives is to provide technical support to customers to design castings. That support begins before the first enquiry is priced.
Review of section thickness, radii, cast holes and draft so that the part runs cleanly and needs the least possible machining.
Soluble wax and ceramic coring to create complex internal passages that would otherwise require fabrication or deep-hole machining.
Gating and feeder layout chosen to fill every section, keep the casting sound and maximise the yield per tree.
Guidance on the most suitable grade for corrosion, strength, temperature and cost, including equivalent grades across standards.
Advice on which dimensions can be held as cast and which are best machined, before tooling is committed.
Conversion studies from fabrication or machined-from-bar to casting, with a clear view of tooling amortisation and piece price.
Send the drawing, the material specification and the expected annual quantity, and we will confirm feasibility along with an indicative tooling and piece price.
Check Feasibility